Firmware/V7/Release Notes/7.3.23-7.3.14

From Snom User Wiki

Jump to: navigation, search

Change Log between 7.3.23 and 7.3.14 release

Features
7.3.23

no features

7.3.22
  • no features
7.3.21
  • VQM reporting is no longer restricted to MetaSwitch server type anymore.
7.3.20
  • Added Hungarian language support.
7.3.19
  • Securing communication with random message id. New CSTA messages for set and get settings, xml push and firewall test. (SCPP-648)
  • Enbabled EHS support (snom300). (SCPP-612)
7.3.18
  • On challenged web client requests, user gets asked for username and password on the display. (SCPP-699)
  • Phone can now upload files into tmpfs and replay them as MOH. (SCPP-696)
  • Parameters like "$ip_addr" as part of the URL stored in for example setting_server are replaced with it's values before the URL is used for provisioning requests. This is the same syntax like for the Action URLs. (SCPP-698)
  • Enhanced language support for Portugues and Hebrew.
  • Added language support for Estonian and Hungarian.
7.3.17
  • Added VQM reporting over SIP, according to draft-ietf-sipping-rtcp-summary using SIP PUBLISH (new setting vq_report_collector).
7.3.16
  • If on Call Pick-up the first character in the string following the "|" is a "!" the rest is dialed out unaltered.
  • Added new setting prioritise_pbx_number_lookup to ignore PBX transmitted user name for incoming calls in order to enable correct lookup in internal LDAP address book. (SCPP-131)
  • Added support for "check-sync;reboot=reregister-only".
  • Added support for RTP listening on multiple multicast sockets (new settings mc_addressX).


Bugfix
7.3.23
  • Fixed G.729 distorted audio and one way audio problems (snom3x0).
  • Don't scroll to next identity if an other than the current identity was removed. (SCPP-816)
  • Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674)
  • Clear area of status line for XML idle screen at given position else at default position (snom360, snom370). (SCPP-815)
  • Set edit mode to numeric for editing numbers if no text to be edited is already set. (SCPP-746)
  • Don't save passwords in exported settings files. Accept empty admin password after reading setting file. (SCPP-823)
  • Could not take call off hold when Shared Line is active identity. (SCPP-445)
  • Function "Play ringer remotely" was playing the ringer of identity X, but not the ringer X. (SCPP-811)
  • Stale 401 should be ignored. (SCPP-708)
7.3.22
  • Scroll to next identity if current identity was removed or show logon wizard if all identities were removed. (SCPP-621)
  • Aborting transfer if phone goes onhook. Send Re-INVITE and switch audio to speaker. (SCPP-667)
  • Call deflection was not working when destination was taken from a list such as dialed number or contacts. (SCPP-797)
  • Changed fkey clear to fkey delete in details of call lists. (SCPP-807)
  • 400 class response to a REFER was not handled. (SCPP-792)
  • Fixed G.726 bad audio quality. Added the RFC3551 byte packing order for G.726 codec (new line setting user_g726_packing_order). (SCPP-526)
7.3.21
  • PBX transmitted user name was sometimes displayed instead of the internal addressbook name if prioritise_pbx_number_lookup was switched off (SCPP-131). Revised the whole ticket again.
  • Menu items were incorrectly mapped in user mode (snom360, snom370). (SCPP-768)
  • If a call out of holding state is terminated go to terminate state first (e.g. play signal). (SCPP-757)
  • Phone did not always send out a SIP line seize message when function keys are configured as buttons. (SCPP-723, SCPP-756)
  • Fixed on/off switching of setting flood_tracing. (SCPP-779)
  • Voice Quality Report included wrong start time value. (SCPP-760)
  • Accept KEY=TRANSFER also on snom300. (SCPP-764)
  • Call duration longer than an hour will be displayed with an h at it's end. (SCPP-767)
7.3.20
  • If the number of missed calls was greater than 9 the number was displayed backwards. (SCPP-740)
  • Call from VIP did not ring if DND was switched on. (SCPP-709)
  • Use big font size in edit mode if Hebrew character mode is switched off (we do not support big Hebrew characters yet). (SCPP-738)
  • When one pressed the volume keys and used the soft keys to change the volume and you return to the idle screen, calls were canceled. (SCPP-737)
  • Fixed a couple of Hebrew display bugs.
  • Fixed issues which occured in edit mode.
  • Changed default character modes in the address book and in edit mode.
  • VQM stats enabled again, they were temporarily removed before.
7.3.19
  • DTMF duration fixed for SIP-INFO. (SCPP-609)
  • Audio device icon fixed in holding state (snom370). (SCPP-508)
  • Extension key inoperative on shared line when phone is off-hook. (SCPP-628)
  • GRUU contact header was enclosed in quotes. (SCPP-451)
  • Call pickup did not work correctly if display name was sent by the server.
  • Phone was crashing if SIP (OPTIONS) messages were sent to it during boot up (snom820). (SCPP-702)
  • Sip UDP src port and sip port encoded in sip message is now equal (snom370). (SCPP-484)
  • Multicast paging was not working reliably (snom3x0). (SCPP-226)
  • Requeueing of failed provisioning URL was shortening the URL by one character on each attempt.
7.3.18
  • Re-INVITE from MOH server causes MOH stream to be redirected to the holding party. (SCPP-653)
  • Removed sending of spurious 482 message.
7.3.17
  • Fixed phone crash which occured after deleting one of the two call lists for missed or received calls (detailview). (SCPP-610)
  • Fixed wrapping of continuous text in minibrowser. (SCPP-551)
  • Added Estonian language support.
  • Refresh GUI after onhook in state holding to change audio icon. (SCPP-509)
  • Transfer on onhook will only connect one incoming and one outgoing call. (SCPP-632)
  • Always use a non-secure RTP connection for MOH. (SCPP-471)
  • URI parameters were being stripped from contact in processing of a 302.
  • Phone extracts now encapsulated options 66/67 out of option 43 as well. (RFC 2132)
  • Initialization of extension keypad fixed. (SCPP-614)
7.3.16
  • Don't accept IP addresses with leading zeros. (SCPP-534)
  • Re-)start autodial timer if enabled only after key events and not on entering LDAP search. (SCPP-584)
  • On LDAP search split a matching line into several lines if a member has more than one phone number. (SCPP-538)
  • LDAP lookup for incoming calls displays only exact matching number. (SCPP-559)
  • Fixed displaying utf8 search results (snom320). (SCPP-556)
  • The reregister function was causing the phone to sometimes loose its registration.
  • Phones are no longer using contact as refer-to header. (SCPP-523)
  • URI scheme was not recognized when it is in caps.
  • "check-sync;reboot=false" sometimes wasn't triggering settings reload from settings server. (SCPP-515)
  • Disabled overload option, wasn't working anyway, but confusing provisioning.
Personal tools
Interoperability