Firmware/Release Notes/Change Log/Features

From Snom User Wiki

Jump to: navigation, search
Features

8.2.11 Features

No new features

8.2.10 Features

  • Call Agent ACD State Synchronization (SCPP-854)

8.2.9 Features

  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • 820 now opens virtual key state automatically on activity, setting allowing that is on by default.

8.2.8 Features

8.2.7 Features

  • Added support for version 6 audio coefficients (snom3xx). Selecting the new room type "v6" leads to same volume behaviour as in version 6 releaeses. (SCPP-889)
  • Added support for options 132 vlan_id (802.1q) and 133 vlan_qos (802.1p). They can even be tunneled via option 43. (SCPP-859)
  • Added OCS support for presence key. (SCPP-641)
  • Minibrowser can now be invoked using HTTP. (SCPP-238)
  • Minibrowser pages can now trigger LEDs. (SCPP-240)
  • Text prediction based search on LDAP directory. (SCPP-409)
  • Transfer on onhook is now available for blind transfer, too. (SCPP-810)
  • Added additional STUN requests (RTPv0) in the beginning of a call for server type Teles. (SCPP-671)
  • Added OID to show CPU load average of last 1min., 5min. and 15min.
  • Added OID to show used, free, cached, lid (phone lowlevel app.) and lcs (phone highlevel app.) memory usage.
  • Added OID to show application uptime.
  • Added OID to show the number of incoming and outgoing messages.
  • Added OID to show the number of open connections.
  • Added OID to show the number of timeouts running.
  • Added OID to show the number of active subscriptions.
  • OCS: The User-Agent header now includes information whether the software type is OCS or not.
  • Added intermediate certificate phone2 that signs the phone certificate. The SSL certificate message encapsulates both certificates.
  • Added support of keys up to 4096 bits in size (client and server side).
  • One can upload and replace files in bmp (snom370-VPN, snom820) and html (snom370-VPN, snom820, snomMP) directories. (SCPP-873)
  • Removed second pair of HTTP user/pwd credentials for standard user. adminmode/admin_mode_pass is enough.(SCPP-679)

8.2.6 Features

No new features

8.2.5 Features

No new features

8.2.4 Features

  • LDAP result sets are sorted now. (SCPP-747)
  • VQM reporting is no longer restricted to MetaSwitch server type anymore.
  • To reduce memory wasting for SIP trace and system log we added a new setting sip_tracing to be able to switch off SIP tracing at all as well as the new loglevel -1 to switch off logging. (SCPP-779)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.2 Features

  • Securing communiction with random message id. New CSTA messages for set and get settings, xml push and firewall test. (SCPP-648)
  • Added option for very fast LED blink rate on ringing (new setting blink_very_fast).
  • Added keyboard lock after timeout (new setting keyboard_lock_timeout). (SCPP-676)
  • Enhanced language support for Portugues and Hebrew.
  • Added language support for Estonian and Hungarian.
  • On challenged web client requests, user gets asked for username and password at the display. This may be used to login a phone user. (SCPP-699)
  • Phone can now upload files into tmpfs and replay them as MOH. (SCPP-696)
  • Parameters like "$ip_addr" as part of the URL stored in for example setting_server are replaced with it's values before the URL is used for provisioning requests. This is the same syntax like for the Action URLs. (SCPP-698)
  • Show login page after logout. (SCPP-678)

8.2.1 Features

  • Enlarged adressbook with entries for first and family name, email, company, birthday, etc. (snom820 and snomMP). (SCPP-522)
  • Hebrew and Cyrillic character editing support.
  • Call can be started out of call lists with wireless headset as well now. (SCPP-351)
  • VQM reporting over SIP, according to draft-ietf-sipping-rtcp-summary using SIP PUBLISH.
  • Added new setting prioritise_pbx_number_lookup to ignore PBX transmitted user name for incoming calls in order to enable correct lookup in internal LDAP address book. (SCPP-131)
  • Added support for RTP listening on multiple multicast sockets.
  • Added new setting empty_tls_client_cert to use empty client certificate in TLS connections. For OCS the setting defaults to on, otherwise to off. (SCPP-597)

8.1.3 Features

  • Call Pick-up: if the first character in the string following the "|" is a "!" the rest is dialed out unaltered
  • Added support for new check-sync option: check-sync;reboot=reregister-only

8.1.2 Features

  • Added new action release to clear previously seized button line.
  • Handle header "Remote-Party-ID" for Cisco Call Manager (CCM). (SCPP-412)
  • New setting user_additional_supported_header for "additional supported headers". (SCPP-413)
  • Added key_dtmf to initiate key events with DTMF tones remotely via http://phoneIP/command.htm?key_dtmf=KEYEVENT. (SCPP-94)
  • PC port can be disabled via new eth_pc option off.

8.1.1 Features

No new features

8.0.13 Features

No new features

8.0.12 Features

  • Complete system-info is now in settings (Phone_GUI). The Help-key on the phone ("?") now shows the support message on the display.

8.0.11 Features

  • redirection with function key type BLF
  • split timezone -10:USA into -10:USA(Hawaii) and 2-10:USA(Aleutian Islands) due to different DSTs
  • a logging entry is created if an Action URL could not be accessed
  • Device Feature Key Synchronization Broadsoft
  • Broadsoft directory access via OCI-P
7.3.26
  • no features.
7.3.25

no features.

7.3.24
  • Added support for version 6 audio coefficients (snom3xx). Selecting the new room type "v6" leads to same volume behaviour as in version 6 releaeses. (SCPP-889)
  • Added support for options 132 vlan_id (802.1q) and 133 vlan_qos (802.1p). They can even be tunneled via option 43. (SCPP-859)
  • Added additional STUN requests (RTPv0) in the beginning of a call for server type Teles. (SCPP-671)
7.3.23

no features

7.3.22
  • no features
7.3.21
  • VQM reporting is no longer restricted to MetaSwitch server type anymore.
7.3.20
  • Added Hungarian language support.
7.3.19
  • Securing communication with random message id. New CSTA messages for set and get settings, xml push and firewall test. (SCPP-648)
  • Enbabled EHS support (snom300). (SCPP-612)
7.3.18
  • On challenged web client requests, user gets asked for username and password on the display. (SCPP-699)
  • Phone can now upload files into tmpfs and replay them as MOH. (SCPP-696)
  • Parameters like "$ip_addr" as part of the URL stored in for example setting_server are replaced with it's values before the URL is used for provisioning requests. This is the same syntax like for the Action URLs. (SCPP-698)
  • Enhanced language support for Portugues and Hebrew.
  • Added language support for Estonian and Hungarian.
7.3.17
  • Added VQM reporting over SIP, according to draft-ietf-sipping-rtcp-summary using SIP PUBLISH (new setting vq_report_collector).
7.3.16
  • If on Call Pick-up the first character in the string following the "|" is a "!" the rest is dialed out unaltered.
  • Added new setting prioritise_pbx_number_lookup to ignore PBX transmitted user name for incoming calls in order to enable correct lookup in internal LDAP address book. (SCPP-131)
  • Added support for "check-sync;reboot=reregister-only".
  • Added support for RTP listening on multiple multicast sockets (new settings mc_addressX).
7.3.14
  • Added key_dtmf to initiate key events with dtmf tones remotely via http://phoneIP/command.htm?key_dtmf=KEYEVENT. (SCPP-94)
  • PC port can be disabled via new eth_pc option off.
7.3.13
  • Added new action release to clear previously seized button line.
  • New setting user_additional_supported_header for "additional supported headers". (SCPP-413)
  • Handle header "Remote-Party-ID" for server type Cisco Call Manager (CCM). (SCPP-412)
7.3.12
  • Added Generic Intercom Button feature. If programmable Function Key is set to Intercom without a target number, user gets asked for the target before Intercom call starts.
  • Added advertisement flash at the index.htm page (new settings advertisement and advertisement_url).
  • Added support for IPv6 DNS server address query.
  • Iso codes (ISO_639-1) are used to name different language files.
7.3.11
  • Provisioning retry counter can be canceled by pressing cancel key
  • If entered incorrectly three times and/or ongoing wrong http password access will be restricted for one minute blocks only.
7.3.10a
  • no new features
7.3.10
  • added timer driven settings refresh from server (new setting settings_refresh_timer)
  • enhanced Russian translation
  • do not show empty Calls screen for 3 seconds anymore
  • setting pickup_indication is available again for big display phones (snom360/snom370)
  • changed default redirect edit mode from alphabetic to numeric (SCPP-120)
  • a logging entry is created if an Action URL could not be accessed (SCPP-146)
  • split USA-10 timezone into 2 timzones to distinguish between hawaii and aleutian islands (new timezone is USA2-10 which has DST in contrast to USA-10 which has not)
  • added unused option to the drop down menu of the timezone setting at the advanced network WEB page (So you can set timezone to empty and read only and it's not showing a specific timezone but unused.)
  • new SIP server type Asterisk
  • compliance to RFC 3863 - Presence Information Data Format (PIDF)
  • set IP address of phone to 0.0.0.0 for Nortel and Sylantro server type on hold_state
  • added client certificate presentation (webserver_cert also used as client certificate)
7.3.9
  • no new features
7.3.8
  • no new features
7.3.7
  • show number of provisioning attempts on the display
  • added Hebrew national language support for (snom370) and (snom320) as well
  • character order of Hebrew XML language files has changed (this means older hebrew texts for the Phone User Interface are not compatible to this version and vice versa, you will experience wrongly ordered Hebrew characters)
  • added additional functionality for fkey type key event; F_TRANSFER:700 would transfer the connected call to destination i.e. 700 (not the incoming call)
  • suppress individual dialog subscriptions when eventlist is on (Broadsoft)
  • change reading direction according to language name (Hebrew reads right to left)
  • supports now Hebrew and special chars like the lock symbol in one image (snom300 with PoE); this means Hebrew support is now part of the usual release and doesn't need an extra image to get displayed properly on (snom300) backlight displays
7.3.5
  • improved audio feedback with auto dial on busy signal
7.3.4
  • duration display for a connected call on (snom370) is hh:mm:ss
  • show IVR dtmf on display during connected state (snom370)
  • consistent behavior for incoming calls in menu states
  • new setting show ivr digits to control digit display while connected (snom360/ 370)
  • unicode characters are displayed properly in title line and soft key texts on (snom360)
  • added settings subscription delay, terminate subscribers on reboot and functionality (from v6.5)
  • show uboot version, uptime and memfree on system info page
  • support for $display local, $display remote, $expansion module, $active key in Action URLs (also within path)
  • print out uptime and memfree to the (sys)log once a day
  • show uboot version on OID 1.3.6.1.2.1.7526.2.4 as well
  • new OIDs 1.3.6.1.2.1.7526.2.7 and 1.3.6.1.2.1.7526.2.8 for memfree and uptime respectively
  • language files can be loaded via TFTP as well
  • modified RTCP so that it also sends SDES CNAME with the RTCP SR
7.3.3
  • show HTTP/Admin password warning on display dependent on ignore security warning
  • LDAP/Directory Search list dials selected contact on handset offhook
  • soft keys for Mute/Unmute are not hidden when redundant fkeys setting is off
  • F LOGON USER can be used on all phones for hot desking (log on/log off user accounts)
  • F LOGOFF ALL prompts log on wizard if logon wizard setting is on
  • Disabled 5 sec. lock on shared line key for Broadsoft/MetaSwitchas this is handled by line seize throttling mechanism
  • block programmable keys while Broadsoft-style shared line is seized
  • 200 OK without SDP is ok when SDP was received in earlier message
  • help link of setting user q corrected
  • fixed timezone selection for China
  • rework of SnomIPPhoneText, better line breaking and <br/> tag support
  • added new {index} parameter for SoftKeyItem (The index parameter is the linenumber in a minibrowser list. e.g. http://192.168.0.55/index.xml?idx={index})
7.3.2
  • new setting offhook dial prompt controls if dial prompt is offered on Offhook and it's on by default (You may not want to make the phone busy by just taking the handset offhook. If this setting is turned off, the phone will continue to show the standard idle display even when the handset is offhook.)
  • post Action URL disconnected on Call completed elsewhere. Technically this call has been received by someone else, however to complete the transition from ringing to call end, Action URL disconnected is called to let the server know.
  • new programmable key type IVR. (The argument is a number that is dialed on key press i.e. sending out an INVITE. Once the call has been established, pressing the same IVR key would send out dtmf digits comprising that number. This can be used to control IVR applications by one key only.)
  • hebrew character support
  • user customised Alert-Info texts/files using built-in melodies (If the value of setting internal ringer text matches the incoming INVITE alert-info header, use the internal melody set up in internal_ringer_file to play the appropriate internal melody for a customized alertinfo.)
  • basic CSTA call control features (phone can be remotely controlled via CSTA protocol)
  • support for more Action URL events
  • added setting show diversion to control display of Diversion header info included in the incoming INVITE
  • new makro prov_host which can be included into provisioning URLs (like mac) in order to get replaced by the setting server host name which has been set differently before. (This makes the usage of provisioning URLs much more dynamic.)
  • added a list for tftp requests to make sure only one request runs at a time
  • firmware status file can be loaded via TFTP as well
  • firmware can be updated via TFTP as well
  • XML language files can be retrieved via TFTP as well
  • firmware update mechanism optimized to use less main memory during update process
  • added bootloader lock mechanism (together with the appropriate bootloader the phone can lock the tftp update option in the bootloader to establish for instance an ITSP lock)
  • new user_server_type nortel
  • No Features
7.1.38
  • Added new action release to clear previously seized button line.
7.1.37
  • Added Generic Intercom Button feature. If programmable fkey is set to Intercom without a target number, user gets asked for the target before intercom call starts.
7.1.36
  • added timer driven settings refresh from server (new setting settings_refresh_timer)
  • enhanced Russian translation
  • do not show empty dialog subscription screen for 3 seconds anymore
  • setting pickup_indication is available again for big display phones (snom360/snom370)
  • changed default redirect edit mode from alphabetic to numeric (SCPP-120)**
  • a logging entry is created if an action url could not be accessed (SCPP-146)
  • split USA-10 timezone into 2 timzones to distinguish between hawaii and aleutian islands (new timezone is USA2-10 which has DST in contrast to USA-10 which has not)
  • added unused option to the drop down menu of the timezone setting at the advanced network WEB page (So you can set timezone to empty and read only and it's not showing a specific timezone but unused.)
  • added client certificate presentation (webserver_cert also used as client certificate)
7.1.35
  • WWW-Contact was no longer being generated
7.1.34
  • new setting offhook dial prompt controls if dial prompt is offered on Offhook (on by default)
  • duration display for a connected call on (snom370) is hh:mm:ss
  • show IVR dtmf on display during connected state (snom370)
  • consistent behavior for incoming calls in menu states
  • unicode characters are displayed properly in title line and soft key texts on (snom360)
  • programmable keys 6 and up were blinking at a lower frequency on incoming calls
  • block programmable keys while Broadsoft-style shared line is seized
  • added additional functionality for fkey type key event; F_TRANSFER:700 would transfer the connected call to destination i.e. 700 (not the incoming call)
  • added setting show diversion to control display of Diversion header info
  • added settings subscription delay, terminate subscribers on reboot and functionality (taken from v6.5)
  • added replaces for alerting call
  • suppress individual dialog subscriptions when eventlist when eventlist is on (Broadsoft)
  • write the DHCP hostname only if there is enough space
  • help link of user q corrected
7.1.33
  • support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite)
  • dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference is available now)
  • use status LED for conference and transfer operation (snom370) (the big LED on top of display shows activity in the said states now)
  • PUBLISH based directory search now supports list of matches (consistent with LDAP directory search results, PUBLISH returned lists are also shown)
  • support DND control through buttons (a DND operation through Buttons programmable key type turns indication on/off on display)
  • call acceptance is dependent on speaker receive call (this new configuration parameter controls if pressing the speaker key can accept a ringing call or not)
  • new configuration parameter global missed counter to track missed calls (this new configuration parameter is to allow backward compatibility to old behavior when missed calls on all SIP lines were counted together)
  • enabled directory search during a call (to help make a second call e.g. for transfer even during a call)
  • Call Pickup through buttons linked to calls state (snom360/snom370) (in the Calls window, pickup is now possible as in dialog state through information gathered from Buttons programmable key type feature)
  • remove ringing calls from list of possible transferees (to make transfer operation more user friendly and avoid unintended transfers by mistake)
  • use soft transfer key only for deflection of ringing call (to have a consistent transfer mechanism, soft key appears only for deflection now)
  • showing display name in call monitoring state controlled by configuration parameter show name dialog (snom360/snom370) (in call monitoring state it is useful to show names if possible instead of numbers of the calls in progress. The new configuration parameter controls this feature. The naming format is the same as set by display method configuration parameter)
  • added new configuration parameter naptr sip uri to convert SIP URI's of the active line using RE Dial Plan for call lists (it's meant to rewrite incoming SIP URI's to be properly formatted for potentially following outgoing calls using that URI from the call lists. Default value is off.)
  • programmable key Active/Line combination receives a ringing call only on original key (to allow making a new call on another programmable key even if there is an incoming call on the first line)
  • option for backlight to completely turn off, blink or dim (snom370) (some users want to turn off the backlight completely after a call is done. All combinations are now possible on snom370)
  • display of audio icons solely dependent on configuration parameter audio device indicator
  • new configuration parameter auto reboot on setting change to enable new auto reboot feature but preserve old behaviour if needed; IMPORTANT: this configuration parameter takes effect on the configuration parameters following it in the setting file only, so if you like to have it effect all configuration parameters in the configuration parameter file, put it at the top of the file! If you experience a constanly rebooting phone set the log level to 7 and see (via syslog server) which configuration parameter causes the loop. (the auto reboot functionality has been included initially into 7.1.33 RC2)
  • show HTTP/Admin password warning on display (snom360/snom370)
  • context- sensitive function keys for Mute/Unmute are not hidden when configuration parameter redundant fkeys is off
  • LDAP/Directory Search list dials selected contact on handset offhook
  • F_LOGON_USER can be used on all phones for Hot Desking (log on/log off user accounts)
  • F_LOGOFF_ALL prompts log on wizard if logon wizard configuration parameter is on
  • Disabled 5 sec. lock on Shared Line key for Broadsoft/MetaSwitch as this is handled by line seize throttling mechanism
  • added protection against brute force attack to find out the HTTP password (more than three unsuccessfull login attempts will block the Web User Interface (WUI) for 1 minute; further groups of three unsuccessfull logins will double the blocking time respectively)
  • show warning message if Web User Interface (WUI) isn't secured by admin- and HTTP user password (show a warning hint at the upper right hand corner)
  • html encode Web User Interface (WUI) pages to prevent XSS attacks (this prevents injected (java-)script code to be executed)
  • new configuration parameter use hidden tags to protect the phone against XSRF attacks (because with each new Web User Interface (WUI) page a new hidden security tag is provided only the authenticated user is able to use the Web User Interface (WUI). Faked HTTP POST requests will not work anymore. With use hidden tags enabled you can do a distinct subset of GET requests with parameters only which are needed for the normal usage of the Web User Interface (WUI) (no direct dialing, no remote control is available if enabled. The mentioned functionality only works if the Web User Interface (WUI) is secured via non default admin- and HTTP passwords!)
  • added button to logout an already authenticated session (a missing opportunity has been added to logoff an authenticated user from the Web User Interface (WUI) page; this button will be displayed in the upper right hand corner only if the Web User Interface (WUI) is secured via non default admin- and HTTP passwords!)
  • added initial security advice Web User Interface (WUI) page (a new security advice Web User Interface (WUI) page has been added which will be shown once initially on restart)
  • new warning message and security advice page can be switched off via new configuration parameter ignore security warning (this has been added for backward compatibility reasons)
  • identity based configuration parameter user expiry can be adjusted in seconds now (via Web User Interface (WUI) you can change the value to your needs without using the previous dropdown presets anymore)
  • added new function key type BLF which is a mix of the Extension and Speed Dial. (The LED is controlled by the dialog state like in the Extension mode, while the key is controlled by the Speed Dial nature. In other words, no matter what the LED is doing, pushing that button will always dial the speed dial number. If you set it to something like *7123, then this button will always pick up the call for 123.) See this description for further details on BLF
  • removed audio device indicator configuration parameter from Advanced Behaviour page, it is available at page Advanced Audio anyway
  • using new encoding format in XML configuration parameter files, denoted by an additional attribute in the tree name (e="2") (from now on a proper HTML encoding is used; downgrading to older versions will make special chars appear wrongly!)
  • show secret configuration parameter values only as asterisks in log
  • show url loading update for redial list (if the list is taking longer than usual, some display update for loading activity shows the phone is processing the list)
  • added pn flag for input, to switch directly to the numeric input mode
  • fixed soft key update problem
  • rework of SnomIPPhoneText, better line breaking and <br/> tag support (it is recommended to use <br/> now instead of <br>, because the softkeys are not working with <br>)
  • added new {index} parameter for SoftKeyItem (The index parameter is the linenumber in a Minibrowser list. e.g. HTTP://192.168.0.55/index.XML?idx={index})
  • allow Minibrowser Action URL called from any Phone User Interface (PUI) state
  • History-Info display is controlled by new configuration parameter show history info (this information is processed by the phone but shown on the display if configuration parameter is turned on)
  • when SRTP is optional, offer both RTP/AVP without crypto and RTP/SAVP with crypto attribute (this is a way to indicate that SRTP is preferred, but not mandatory; controlled by new configuration parameter user savp)
  • added new option sip_info_only for configuration parameter user dtmf info, either as mutually exclusive with ib or oob dtmf or together with either of them (dtmf via INFO can be sent in addition to in/ob dtmf now, IMPORTANT: THE DEFAULT BEHAVIOUR HAS CHANGED!)
  • call completion subscription default expiry value is set down to 60 sec from before 3600 sec
  • hold/retrieve was not working in some scenarios
  • TLS ROC fix (after a couple of minutes one way audio occured)
  • 200 OK without SDP is ok when SDP was received in earlier message
  • added new language Catalan
  • reviewed Phone User Interface (PUI) text translations (especially the translations for FR, IT, NL, DK, SW, NO, SP have been improved)
  • added DST for Perth/Australia
  • DST changes for Australia
  • DST changes for New Zealand
  • added different room types (new configuration parameter handsfree mode) for handsfree mode: quiet, normal, echoic (different DSP coefficient presets for different room types have been added to enhance hands free audio quality in different environments)
  • start storing empty responses in DNS cache after basic Mass Deployment is done (not working DNS lookups because of blocked switch ports are not configuration parameter non resolvable FQHN anymore on the black list)
  • gracefully restart if DHCP server isn't reachable anymore (according to the RFC we added a new timer T2 which will restart the phone if it has been elapsed to 7/8; thus the phone will begin broadcasting again for a new DHCP server)
  • added completely turning off of light gradually apart from dim (snom370) (Some people complained that the snom370 light does not completely turn off when the light configuration parameter use backlight: is set to on on Preferences Web User Interface (WUI) page. Now, it slowly fades and turns off competely with the on configuration parameter (default). The previous behaviour has also been preserved where the light fades slowly and remains dimly lit without completely turning off. That configuration parameter option is now called dim.)
  • Spanning Tree Protocol (STP) packets are now forwarded from the LAN to the PC ethernet port (Managable switches supporting STP can now detect network loops.)
7.1.32
  • support special characters on Idle Screen (ÀÁÂÃÄÅÈÉÊËÌÍÎÏÒÓÔÕÙÚÛÜ) (snom360)
  • support active user and active host in Action URLs (in order to send relevant information during a call)
  • space separated concatenated status line messages (snom360/snom370) (for better readability)
  • added support for BroadWorks flash-based services (applicable to Broadworks server only)
  • Action URL request response does not disturb user operations anymore (display update after the response is received was disturbing the active calls)
  • added support for new tags <fetch>, <Label>, <br> and clearlight attribute for the <SnomIPPhoneDirectory> tag
  • added timezones for Venezuela and New Caledonia
  • language file retrieved via Mass Deployment replaces old one on flash (the provisioned language file is now stored on the local flash)
7.1.31
  • line based missed call counter (missed calls can be counted independently for each SIP line on the phone)
  • handle advanced wireless headset scenarios (call making, acceptance, cancellation can be handled by wireless headset)
  • Missed-Calls-Message header handled for all server types
7.1.30
  • added Austrian tone scheme
  • support wild card * Dial Plan match without any rewrite
  • volume keys change speaker volume in dual-audio mode
  • do not ask for DHCP server if IP gateway and DNS server are not set (phone may work even if IP gateway and DNS server aren't set, which wasn't the policy before)
  • use request URI when selecting line key (further enhancement of the topic incoming calls were signalled on wrong line key (in case of multiple identities) from previous version)
  • support for more tone schemes (several tone schemes already available via Phone User Interface (PUI) weren't reflected at the web page before)
7.1.29
  • look for exact LDAP match on incoming e164 number (new setting ldap lookup ringing)
  • backward compatibility to v6 Regular Expression Dial Plan (the old Dial Plan is back)
  • restrict further outgoing calls on redial (it's not possible to dial accidentally twice via redial key anymore)
  • flash plugin works now independent of webserver mode (port for flash plugin was opened together with port for HTTP service, if HTTPS only was used, flash plugin port wasn't opened at all)
  • on update make the watchdog timeout much bigger (in case of an update the timeout is 1 hour)
7.1.28
  • display list of matches in response to PUBLISH (number-guessing)
  • changed default value for casing mic to 5
  • remove proprietary setting files from setting urls list if a snom file was found before
7.1.27
  • hard keys for DIRECTORY_SEARCH & PRESENCE work in edit mode
  • new Voicemail icon for active line (s360)
  • added Voicemail indication on status line (s300)
  • text message view through MWI state possible now (s300)
  • Voicemail soft key moved to S4 (s320)
  • Mute switch between S2 & S3 (always on S2, the positioning adjusts according to space: s320)
  • delay automated calls (redial, etc.) until line seize response is received (Broadsoft)
  • reboot once after setting conversion at traversal from v6 to v7 anyway
  • added personal message recording while offhook
  • change volume not allowed during free seating
  • remove dangling held call on cancel (server caused call drop)
  • special call acceptance through fkeys for active context (connected to nothing)
  • handle missing ack or cancel forwarded by server during hold
  • handle longer rewrite than match in Dial Plan
  • added on/off option for keepalive NAT
  • switch DHCP off during traversal from v6 to v7
  • new setting rtp keepalive to switch off RTP keepalive on hold calls
  • presence activities are mapped to activity ids before publishing
7.1.26
  • port 5061 was being dropped from URI
  • added watchdog usage
  • reset eth switch ARP table to prevent not working switch/DHCP on boot up
  • line seize subscriptions need to be throttled (Broadsoft)
7.1.25
7.1.24
  • added directory clearlight attribute
  • added <br> tag for SnomIPPhoneText
  • make register retry interval and subscription expiry configurable (new settings retry after failed register and user subscription expiry)
  • added support for MetaSwitch server type
  • PRACK usage can be disabled via new setting send prack
  • enhanced asking for password in case it was typed in wrongly
7.1.23
  • wireless headset enhancements with dantronic feedback
7.1.22
  • added support for URL with credentials like user:pass@host:port
  • local conference feature is limited to 3 parties
  • added sanity check for auto redial timer
  • Broadsoft SCA: skip line keys when they appear before Shared Line keys
  • ask up to three times for the right password if typed in wrongly
  • button control through PBX (new function key type button)
  • do not check SDP version if server type is Broadsoft
  • added new improved wireless headset controls
7.1.21
  • voice recorder call release fix
  • play busy/failed signal on call hold if setting release sound is set
  • show CFwd for all redirection types in status
  • text changes according to documentation
  • reload xml Idle Screen
  • settings flags were not properly reflected if taken from XML setting files
  • new value for vol speaker mic gain
  • added NTP timestamp
7.1.20

No Features.

7.1.19
  • F_DIRECTORY_SEARCH handles ldap & presence directory lookup
7.1.18
  • support for latin, latin-1, Latin Extended-A, Latin Extended-B, IPA Extensions, Spacing Modifier Letters, Combining Diacritical Marks, Greek and Coptic, Cyrillic glyphs (snom360)
  • support inbuilt snom melodies in Alert-Info (e.g. Alert-Info: <http://127.0.0.1/Ringer4>)
  • failover identity support using setting: user failover identity
  • support for 3 extension keypads added
  • Auto Dial was effected by Dial Plan timeouts
  • added preselect for menus and directories
  • dialed & received calls control per sip line
  • added support for cascadable sidecars
  • outbound proxy for emergency numbers
  • double talk improvement, fixed dial tone fluctuation in handsfree (when loud)
  • VLAN tagging support for incoming/outgoing packets via phone switch
7.1.17
  • star code exception handling e.g. *1*2*3*4 not to be confused as an ip address
  • expanded Dial Plan to support *79, [2-9].., etc
  • show generic message when Voicemail Boxdetails are not notified
  • HOLD phone symbol added for (snom300)
  • display version info on start up
  • enhanced unicode support (snom320)
  • clear old Dial Plan when provisioned
7.1.16
  • No Features
7.1.15
  • support for latin and latin-1 glyphs support (snom360)
  • optimized line wrapping algorithm
  • capital nordic AE added (snom320)
  • first line of Idle Screen is now utf8 save (snom320)
  • fixed Dial Plan xml with timeout 0 followed by a longer match
  • moved '+' more to the beginning on key 1
  • new Action URL variable 'active_url' to get the active registration
7.1.12
7.1.11
  • do not send "held-private" when call is retrieved
  • ethernet ports speed settings are now used even on bootup
  • syslog server setting is now used even on bootup
  • increased headset mic gain in new audio settings
7.1.10
  • ask for PIN while locking keyboard
  • added Call Pickup via access code on programmable function keys e.g. ext@dmn.org|*68
  • enable GRUU for subscriptions
  • changed default presence states
  • new setting "reject calls with 603" to reject calls with 603 instead of 486
  • new setting enable keyboard lock to allow keyboard lock feature
  • ethernet ports speed settings are working now on change
  • syslog server setting is working now on change
  • special character handling in directory fixed
  • image header for bootloader updates changed (snom300/snom320/snom360); new images are needed now for downgrading to v6
7.1.9
  • enabled dialing in presence, contacts and call monitoring states (snom360/snom370)
  • setting idle offhook to control handset offhook and idle state behavior
  • no general Dial Plan by default
  • call history was showing first local and then remote list
  • TRANSFER programmable key could not be remapped
  • adjust mic and volume settings during transition from v6 to v7
  • grey out text input fields if read only
7.1.8
  • added tone schemes for France, Italy, Netherlands, Norway and Spain
  • MENU key is programmable (snom320)
  • consolidation of factory provided menus on Settings key (snom320)
  • support current identity Voicemail Boxdependent on stk_mailbox_active
  • presence state can be changed via REG menu
  • speed up display refresh (snom370)
  • optimized directory search listing
  • presence status can be changed via identity menu (snom300)
  • conference on snom300 without key mapping
  • logoff line resets detailed user settings
  • added support for NTLM
  • added support for new shorter XML settings format (this is not backward compatible to the previous XML format in order you want to downgrade to an older v7 version)
  • changes to admin mode needs no reboot anymore to get applied
  • manually loading settings file is deleting phone book as well
  • user changes to NTP server got lost, fixed
  • lid is using RR scheduling now
  • a multicast rtp (streaming) fix
7.1.7
  • "adminmode" and admin mode password access to the webserver
  • save and export directory as CSV or XML format
  • replacing {prov_host} macro works even if setting server is an IP address or host name only
  • minibrowser available for c and snom320 as well
7.1.6
  • directory search list for LDAP and presence (snom360/snom370)
  • basic directory search using presence
  • handle MWI with same mw account & domain for different identities
  • http client authentication added; new settings http lient user, http client pass
  • added {prov_host} macro to be inserted into setting file urls to be replaced by current setting server host
  • use {prov_host} makro for default firmware status file retrieval
  • flash plugin is off by default (security reasons)
7.1.5
  • added ramdomized bootup delay
7.1.4
  • added "Registration failed" Action URL
  • added subscriptions log page
  • new default values for audio devices
  • reset settings deletes firmware setting as well
7.1.2
  • settings export can be done in plain old and new XML format now
  • improved tone scheme accoustic levels
  • set "failed" flag on not working update to prevent loops
7.1.1
  • Action URL for log on/log off
  • added auto connect for call monitoring
  • new conference layout for snom370
  • call monitoring state handles other keys as well
  • wizard asks for language again
  • show call status information (100 Trying/180 Ringing etc)
  • call monitor & presence can become default idle states
  • no restart needed on language changes anymore
  • timezone change doesn't need any reboot anymore
  • critical user settings do not need a reboot anymore
  • no restart required on programmable key changes
  • added tab indexing for html pages with help links
  • initial changes for handsfree improvement
7.0.20
7.0.19
7.0.17
  • MENU key is programmable
  • Option to disable programmed redirection (stk_redirect_ringing: Feature Request for Call Centres)
Personal tools
Interoperability