FAQ/snom M/update using dect snom com

From Snom User Wiki

< FAQ
Jump to: navigation, search

To update the snom M-series, you can either use your own web server or the snom M-series update server. For information on using your own web server, please see the Firmware page.

Note: If you don't specify the "Update firmware path" the snom M-series update server always uses the latest stable build of a version. The available firmware versions are listed in the table below.

File:Firmware_update_m700.PNG

How to Update snom M-Series phones Using the snom M-Series Update Server

  1. Please open the web user interface of your base station. (If you don't know the IP address, press the menu key and then type *47* on the keypad. If the handset has detected more than one base station, please compare the MAC address shown on the IP search screen with the MAC address on your base station.)
  2. Select Firmware Update in the left navigation menu.
  3. Use the settings Recommended Values from the table below :
Setting Name Valid Values Details
Firmware update server address: http://dect.snom.com

http://dect.snom.com without trailing slash (/)

Firmware path:
  • Please refer to the Firmware download page for the proper value
M85/M65/M25:Required Version


  • Please refer to the Firmware download page for the proper value

Note: This field will only appear if one or more handsets are registered to the base station.

M85/M65/M25:Required branch


  • Please refer to the Firmware download page for the proper value

Note: This field will only appear if one or more handsets are registered to the base station.

M5:Required Version
  • Please refer to the Firmware download page for the proper value

Note: This field will only appear if one or more M5 handsets are registered to the base station.

Update base stations:

Update this base station only
Update all Base Stations

Note: This field will only appear if the base is part of a multicell system. For M700, use Update all base stations in multicell installation when you want to update all chained base stations. Not applicable to M300.

Update Base Stations: Required Version


  • Please refer to the Firmware download page for the proper value

-

  1. Enter the firmware update server address and any required handset and repeater firmware versions shown on the page.
  2. In the Update Base Stations section, select one of the radio buttons. The default is Update this Base Station only.
  3. Enter the firmware version in the text field of Required Version.
  4. Enter the branch number in the text field of Required Branch.
  5. Click on the Save/Start Update button to save the new values and start the update


NOTE:
The base station update may take up to 10 min.
Handset updates will start the next time each respective handset is placed into the charger.

Personal tools
Interoperability