FAQ/How to trigger the phone to synchronize its settings via mass deployment

From Snom User Wiki

< FAQ
Jump to: navigation, search

==NOTE: This page is outdated! See updated page here: https://service.snom.com/display/wiki/How+to+trigger+the+phone+to+reset+or+synchronize+its+settings+via+provisioning+-+mass+deployment


Languages: English • Deutsch


Answer

Configure these settings on the phone┬┤s web interface

Support broken Registrar to "on"
Filter Packets from Registrar to "off"
Network identity (port): 5060

Note: In order to have the snom M9 accept check-sync commands, the server type needs to be set to Asterisk, and Allow Check-Sync must be set to 'on'.

The phone can resync the settings with the setting server if it receives a message like this:

NOTIFY sip:<user>@<dsthost> SIP/2.0
To: sip:<user>@<dsthost>
From: sip:sipsak@<srchost>
CSeq: 10 NOTIFY
Call-ID: 1234@<srchost>
Event: check-sync;reboot=false

Note: Please add CRLF at the end of each line and an empty last line:

File:notify_crlf.png

where

  • <user> = Valid SIP account (identity)
  • <dsthost> = phone's IP Address / Domain Name
  • <srchost> = Host IP Address / Domain Name

If reboot is set to

The message can be sent using sipsak:

sipsak -vvv -G -s sip:<user>@<dsthost> -H <srchost> -f <file>

where

  • <user> = Valid SIP account (identity)
  • <srchost> = Host IP Address / Domain Name
  • <file> = ASCII text file with the NOTIFY SIP message
Personal tools
Interoperability