FAQ/How can i use a m3 Repeater with the snom m9r?

From Snom User Wiki

< FAQ
Jump to: navigation, search
Languages: English • Deutsch

Answer

  • Switch off the m3 Repeater (disconnect the power plug).
  • Switch on the Repeater for 1 to 5 seconds and switch off again.
  • Switch on the Repeater for 20 to 30 seconds and switch it off again.


Reset the snom m9r to factory defaults. Set the snom m9r to ‘Repeater Mode’ <on>. Plug in the snom m3 Repeater and watch the red LED blink for only a few seconds, then the red Repeater LED stayed on. Unplug the snom m9r and watch the snom m3 Repeater LED begin flashing again. This is to prove that the snom m3 repeater is linked to that particular snom m9r base.

Personal tools
Interoperability