Accessories/Expansion Module

From Snom User Wiki

< Accessories(Redirected from Expansion Module)
Jump to: navigation, search

Contents

Hardware Version V1.0

ATTENTION: the V1 expansion module is in End of Life

  • snom Image:Phone-model-300-disabled.gif
    • No Expansion Module Support
  • snom Image:Phone-model-320.gif
    • can be used from FW Version 6.0 onwards
    • Only 1 (one) expansion module is supported
    • Download the phone's latest User Manual
  • snom Image:Phone-model-360.gif Image:Phone-model-370.gif
    • Only 1 (one) expansion module is supported
    • Download the phone's latest User Manual
Note: Expansion module V1.0 can only be used for the stand alone connection. 
It is not possible to cascade Expansion modules V1.0.
  • Snom D305, D315, D345, D375
    • No Expansion Module Support

Hardware Version V2.0

  • snom Image:Phone-model-300-disabled.gif
    • No Expansion Module Support
  • snom Image:Phone-model-320.gif Image:Phone-model-360.gif Image:Phone-model-370.gif
  • Snom D305, D315, D345, D375
    • No official support
    • Compatibility is not guaranteed

Connection

  • Before connecting or disconnecting an Expansion Module first unplug your phone from power
  • You may then turn it upside down to get access to the its jacks.
  • The V2.0's are connected to the phone in a cascade:
    • Connect the first Expansion Module's EXT IN using the provided cable directly to the phone's EXT-jack.
    • Connect the EXT IN of the second Expansion Module to the EXT OUT of the first Expansion Module.
    • A third Expansion Module may be added to the second following the same scheme.
  • If all the Expansion Modules are connected and fitted with the delivered screws you may reconnect your phone to the power supply or POE.
  • The phone starts up and approx. 45 seconds after power up all LEDs of all connected Expansion Modules light up for three seconds to indicate their operational state.
Note: You do not need an additional power-supply for your Expansion modules.

Quick Start Guide snom Expansion Module V2.0 EN-DE-FR-IT-ES

Language Format Size Revision Notes
  • PDF Image:pdf.gif
  • 1.6 MB
  • 1.01 (maintained)
  • EN: Delivery content, installation, and use of the module
  • DE: Lieferumfang, Installation und Verwendung des Erweiterungsmoduls V2.0
  • FR: Contenu de l'emballage, installation et à l'utilisation du module dexpansion V2.0
  • IT: Contenuto della confezione, installazione e il uso del modulo aggiuntivo V2.0
  • ES: En la caja, instalación y el uso del módulo de ampliación V2.0

Using the Expansion Module V2.0 with D315/D305 phones

Language Format Size Revision Notes
  • PDF Image:pdf.gif
  • 0.25 MB
  • EN: You can use an existing Expansion Module V2.0 with the D315 and D305 phones by connecting it to the phone‘s EXT connector, but please note and make sure to heed the following warning: Attach the module to the phone with one screw only, using the top hole. Using a screw in the bottom hole will damage the phone‘s PCB!
  • DE: Sie können ein vorhandenes Erweiterungsmodul V2.0 mit den Telefonen D315 und D305 verwenden, indem Sie es an die mit EXT beschriftete Buchse am Telefon anschließen. Beachten Sie jedoch bitte unbedingt den folgenden Hinweis: Befestigen Sie das Modul nur mit einer Schraube, die in das obere Loch geschraubt wird. Die Verwendung einer Schraube im unteren Loch würde die Platine des Telefons beschädigen!
Personal tools
Interoperability