Accessories/Expansion Module
From Snom User Wiki
Contents |
Hardware Version V1.0
- snom
- No Expansion Module Support
- snom
- can be used from FW Version 6.0 onwards
- Only 1 (one) expansion module is supported
- Download the phone's latest User Manual
- snom
- Only 1 (one) expansion module is supported
- Download the phone's latest User Manual
Note: Expansion module V1.0 can only be used for the stand alone connection.
It is not possible to cascade Expansion modules V1.0.
Hardware Version V2.0
- snom
- No Expansion Module Support
- snom
- Cascades up to 3 (three) modules to your phone providing up to 126 additional keys + LEDs
- requires Firmware Update to V7
- a single V2.0 expansion Module (not cascadable) is also supported by the latest V6 Firmware.
- Download the phone's latest User Manual
Connection
- Before connecting or disconnecting an Expansion Module first unplug your phone from power
- You may then turn it upside down to get access to the its jacks.
- The V2.0's are connected to the phone in a cascade:
- Connect the first Expansion Module's EXT IN using the provided cable directly to the phone's EXT-jack.
- Connect the EXT IN of the second Expansion Module to the EXT OUT of the first Expansion Module.
- A third Expansion Module may be added to the second following the same scheme.
- If all the Expansion Modules are connected and fitted with the delivered screws you may reconnect your phone to the power supply or POE.
- The phone starts up and approx. 45 seconds after power up all LEDs of all connected Expansion Modules light up for three seconds to indicate their operational state.
Note: You do not need an additional power-supply for your Expansion modules.
Quick Start Guide snom Expansion Module V2.0 EN-DE-FR-IT-ES
| Language | Format | Size | Revision | Notes |
|
|
|
|
